AZCO Corp

LAMINATION STATION WITH UNWIND, REWIND, AND ROLL FEED ASSEMBLY

Custom Lamination Station with UD Dancer and Roll Feed 207048

LAMINATION STATION WITH UNWIND, REWIND, AND ROLL FEED ASSEMBLY

SKU: Custom Lamination Station with UD Dancer and Roll Feed 207048

Requirements

This application required a system with an unwind roll having the following dimensions of 3” core, 18” or less OD, up to 8” wide weighing under 50 lbs.

 

Requirements

This application required a system with an unwind roll having the following dimensions of 3” core, 18” or less OD, up to 8” wide weighing under 50 lbs.

Our Solution

Model# UD1 Dancer Unwind/Rewind Stations

  • Unwind/rewind are cantilever design
  • Unit is powered by a variable speed motor and drive
  • Drive motor maintains a consistent loop of material
  • The dancer assembly will feed back the motor control creating consistent tension
  • Rocker switch allows the unit to change direction for easy setup and versatility.
  • Unit can handle a roll of material with a maximum OD of 18″, a maximum width of 8″ on a 3″ ID core weighing less than 50 lbs

AZCO SUR-FEED Roll Feed Assembly

  • Precision ground urethane drive rollers advance the material
  • Top idler roller is spring-loaded
  • Precision ground ball bearings, which require no lubrication
  • A guide will help direct the material through the unit
  • Linear ball bearing bushings
  • Idler rollers will guide the web through the system from the unwind, through the feeder assembly to the rewind

Base Plate

  • ½” thick aluminum plate clear anodized
  • Integrated system where each unit is aligned for accurate tracking
  • Adjustable leveling screws
  • Free standing assembly is available

    Get more information on this product

    •  1/2 mm thick copper
    • aluminum foil up to 1 mm thick