📞 973-439-1428

SUR-SIZE™ Cut-To-Length Assembly

More Views

SUR-SIZE™ Cut-To-Length Assembly | FG-110

Downloads

Related Models

Custom Cut-To-Length Units

The Building Blocks Of Automation

Build your own unit!
You may be able to apply for any of these additional products below.

  • Description
  • Accessories
  • Options
  • Benefits
  • Specifications
  • Materials

The combination of a knife assembly and a roll feeder creates a SUR-SIZE™ cut-to-length assembly. The SUR-SIZE™ cut-to-length assemblies are capable of handling a wide variety of flexible materials. The cut-to-length assembly is a reliable, simple to use, self-contained module. It is a complete unit that delivers a finished product to your specifications. The unit can run to a length or to a registration mark.

Simple and easy to use, just enter the length and quantity on the color touch screen. The units automatically feed, measure, cut and count the pieces to a required size. After the exact number of pieces are cut, the unit stops. An end of cycle signal is provided once the cut is completed. For a single automated one shot process, this unit will feed and cut the material on demand. Clean cuts are provided by the guillotine knife assembly. Small guillotine cut-to-length assemblies are available in two configurations.

The modular style units are provided with a 2m/6.5ft.cable to allow flexibility in placement. This arrangement is well suited to in-line applications where this unit can be either a slave or master to other components. See models SM4/SM6 for information on benchtop style units.

We can support each of these SUR-SIZE units around the world with our remote access. Each unit is built with a USB port which is directly connected to the controls. The unit can be connected to an internet interface utilizing a USB cable allowing tech support anywhere in the world. Support for resetting the unit, getting remote training, and even complete software upgrades are available. 

  • Eye registration: a fiber optic sensor will locate a register mark to cycle the unit
  • No-product sensor
  • Product verification sensor
  • Pneumatic preloaded idler roller
  • High accuracy drive to +/-.05mm/.002in
  • One-shot input and feedback output
  • Cut lengths to 55km/34 miles
  • Infeed roll unwind
  • Quantity count to 100 million
  • Outfeed conveyor
  • High speed drive package
  • I/O expansion card: 24 inputs/12 outputs
  • Servo drive package
  • Slitter attachment
  • Steel drive roller
  • Static control
  • Line speed tracking
  • Specials to 66 in. wide
  • All electric
  • Easy to use as stand-alone unit or as in-line component
  • Easy operator interface with a color touch pad
  • Enter lengths in either inches or metric
  • Module knife cartridge
  • On demand one-shot
  • Reduced scrap
  • Eliminates the need for a large inventory of cut product
  • Minimum length: 0.1mm/0.005"
  • Maximum quantity count: 999,999
  • Power requirements: 110 V AC to 220 V AC
  • 30 - 90 psi (2 - 6 bar) compressed air
  • Accuracy: +/- 0.38mm/0.015" or 0.1% of cut length (whichever is larger)
  • Absorbent pads, film, felt, foam, foil, gaskets, hose, laminates, mesh, metalized film, nonwoven, pads, paper, personal care products, PTFE, rubber, shrink tubing, tape, test strips, thin gauge metal, tubing, Velcro

    WARNING! UNIT MUST BE PROPERLY GUARDED AT ALL TIMES TO MEET ALL STATE, FEDERAL, AND LOCAL REQUIREMENTS

    Get More Information

    Captcha

    * Required Fields