Packaging

Material:  Absorbent pad and oxygen absorber

Requirements:

This application required cutting and placing absorbent pads into trays on a moving line, and then cutting and dispensing  desiccant into the same trays.

Requirements: 

This application required accurately cutting and dispensing desiccant material from a roll into bottles in a controlled environment at a line speed of 80-90 bottles per minute.

Material:  0.5 gram desiccant material in roll form

Material:  Sachets from a strip

• Pouch width:  56mm squared
• Pouch thickness:  1.5mm

Requirements

To cut and dispense a sachet into a container.

Speed:   90-100 cycles per min

Requirements:

This application required placing absorbent pads onto trays.

Requirements

Application: a 70mm film on a spool which needed to have a UV adhesive placed onto it; laminate a thicker plastic top piece; go through a set of nip rollers; and then cut the lamination to a registered mark to length.

213039 - Laminator unwind

Material:  Liquid-filled pouches

• Pouch size: 83.06mm [3.27”] x 140mm [5.51”] long

Requirements:

This application required a machine to rotary die cut liquid-filled pouches coming from a packaging machine or from a bandoleer. 

Speed:  120 cycles per minute
Tolerance: +/- 2mm (0.078”).