Punches

Requirements

To incorporate an oversized version of our standard punch assembly with a custom shape to add to an existing production line in order to produce pouches.

Requirements

This application required punching a roll of material approximately 4” wide and then rewinding it back onto a core. Precise holes were placed in the material. The cycle rate requirement was approximately 400 punches/minute with a tolerance of +/- .008”

AZCO SUR-CUT™ Station with a cordless unwind, Brake RF110, punch station, dual tape station and FG-110 cut to length.

Material:  200mm [7.87"] max Nonwoven, 100mm [3.94"] Film

Requirements

Feed, micro-perforate, punch and cut material with accuracy +/- 0.38mm [0.015"] or 0.1% of cut length, whichever is greater.

Material:  85mm x 54mm x .75mm laminated plastic cards 

Requirements: 

This application required punching 4 holes into plastic cards and then cutting the cards in half lengthwise.