📞 973-439-1428

Guillotine Knife Assemblies

9 Item(s)

per page
  1. Guillotine Knife Assembly

    Guillotine Knife Assembly

    Model: Custom Guillotine Knife Assembly

    Requirements

    This application required a very large opening to pass the product through. Space was very tight.

      

  2. SmartKnife

    SMARTKNIFE SKC-250

    Model: Custom SmartKnife 214037

    • Special Base and Mounting Plate
    • Guarding
    • Trigger Eye

      

  3. SMARTKNIFE SKC-630SP

    SMARTKNIFE SKC-630SP

    Model: CUSTOM SMARTKNIFE 215032

    Material

    Polyester or metalized PET, 0.10mm-0.30mm [0.004"-0.012"] thick, 610mm [24"] wide

    Requirements

    The application required cutting material and removing slugs from in between the finished cut product pieces.

      

  4. GUILLOTINE KNIFE ASSEMBLIES GC-400SP, GC-250SP WITH CONVEYORS

    GUILLOTINE KNIFE ASSEMBLIES GC-400SP, GC-250SP WITH CONVEYORS

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 217077

    Material:    20cm [7.87in] x 29cm [11.42in] pieces of fluorocarbon-based synthetic rubber

    Thickness:  15mm [0.59in]– 25mm [0.98in]

    Requirements: 

    This application required reducing the pieces of material to small squares, roughly 10mm [0.39in] x 10mm [0.39in].

     

      

  5. GUILLOTINE KNIFE ASSEMBLY GC-630 WITH UNWIND, ROLL FEEDER, SLITTER, AND CONVEYOR

    GUILLOTINE KNIFE ASSEMBLY GC-630 WITH UNWIND, ROLL FEEDER, SLITTER, AND CONVEYOR

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 218040

    Material:  Carbon filter paper 

    Requirements: 

     This application required unwinding carbon filter paper material from a roll, slitting it, and then cutting the strips to length at varying angles.

      

  6. MANUAL CUTTING STATION GO-110HD

    MANUAL CUTTING STATION GO-110HD

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 217033


    Material: Solid plastic sticks

    Requirements:

    To manually cut material to length.

      

  7. Guillotine Knife Assembly GH-400

    Guillotine Knife Assembly GH-400

    Model: Custom Guillotine Knife Assembly 212067

    Requirements

    This application needed a unit to cut the material on their extruding line.

      

  8. Guillotine Knife Assembly GH-1000

    Guillotine Knife Assembly GH-1000

    Model: Custom Guillotine Knife Assembly 212071

    Requirements

    To replace an OEM knife assembly with a more reliable modular system.

      

  9. Guillotine Knife Assembly SKC-1651

    Guillotine Knife Assembly SKC-1651

    Model: Custom Guillotine Knife Assembly 213003

    Material:  Laminated polyester foam with nylon backing and/or neoprene

    Requirements

    Cut 61“ wide laminar foam to a certain size.  Line speed was 6.6” a minute, cut length was 12”-16”, and the height off the floor was 30”.

      

9 Item(s)

per page