šŸ“ž 973-439-1428

Converting

Items 61 to 80 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  1. Slitter Shear Cut SLS-630

    Slitter Shear Cut SLS-630

    Model: Custom Slitter Station 213001

    Material:  Epoxy and glass composite material, 15” wide and .015” thick

    Requirements

    A module shear cut slitter station was needed to take material and slit it down to the proper size.

      

  2. SmartKnife

    SMARTKNIFE SKC-250

    Model: Custom SmartKnife 214037

    • Special Base and Mounting Plate
    • Guarding
    • Trigger Eye

      

  3. SMARTKNIFE SKC-630SP

    SMARTKNIFE SKC-630SP

    Model: CUSTOM SMARTKNIFE 215032

    Material

    Polyester or metalized PET, 0.10mm-0.30mm [0.004"-0.012"] thick, 610mm [24"] wide

    Requirements

    The application required cutting material and removing slugs from in between the finished cut product pieces.

      

  4. SUR-SIZE Cut-to-length with slitter

    SUR-SIZE Cut-to-length with slitter

    Model: Custom knife assembly 212003

    Requirements

    This application required accurately feeding a paper-based product with a lot of dots on it to a length based on the position of the dots, slit it, cut it into small pieces, and take it away to go into the next process.

      

  5. SUR-SIZEā„¢ Cut to Length Module w/Remote Controls

    SUR-SIZEā„¢ Cut to Length Module w/Remote Controls

    Model: Custom FG-250

    Cut to Length Module with Remote Controls

      

  6. T-Stand

    T-Stand

    Model: Custom T-Stand 213037

    T-Stand 213037

      

  7. Test Strip Cutter

    Test Strip Cutter

    Model: Test Strip Cutter from Sheets

    This application requires cutting a diagnostic sheet into individual pieces.

    AZCO’S test strip cutter is an automated two step system.  The sheet is placed onto an in-feed station from where  the motor actuator will move it into the first cutting station.  This station will cut the sheet into individual cards.  The cutting station will have rotary shear cut blades driven by a variable speed motor. The edge trim and the areas between the strips will go into a scrap bin below.

      

  8. TEST STRIP CUTTER

    TEST STRIP CUTTER

    Model: CUSTOM CUT-TO-LENGTH 218011

    Material:  Test strips in roll form

    Requirements: 

    This application required unwinding test strip material in roll form and cutting to length.

      

  9. Test Strip Cutter

    Test Strip Cutter

    Model: Test Strip Cutter from Rolls

    This application is ideal for specialized cutting. Unlike our other products, Test Strip Cutters are catered to your specific needs with exceptional quality and durability. This Test Strip Cutter in particular requires cutting diagnostic strips from rolls into individual pieces.

      

  10. Traveling Knife

    Traveling Knife

    Model: Custom Traveling Knife

    This custom traveling knife consists of an unwind/rewind unit, a custom roll feeder and a knife assembly. The traveling knife is a circular rotary knife assembly that can cut a thin film and a thick, dense material. The rotary blade, made from tool steel, will be cut up against the solid hardened tool steel anvil. The knife assembly is capable of cutting in one direction. Upon customer actuation, it can return and cut in the opposite direction.

    A shear cut blade gives the cleanest cut and is the recommended blade choice for most applications. The cutting force is not limited by pneumatic preload on the cutter

      

  11. Traveling Knife TS-1800

    Traveling Knife TS-1800

    Model: Custom Traveling Knife 212078

    Requirements

    A modular system that would give the flexibility to feed material out and then make a manual cut with a two hand control.

      

  12. TRAVERSE REWIND WITH GUIDE ASSEMBLY

    TRAVERSE REWIND WITH GUIDE ASSEMBLY

    Model: CUSTOM TRW-1 REWIND 218029

    Requirements:  This application required a rewind that would create a spiral wound roll.

      

  13. Tubing Cutter

    Tubing Cutter

    Model: Custom Tubing Cutter 214032

    This system is offered as a stand alone table top unit, or it can be a slave to your process. The tubing is indexed by a servo motor with dual drive tractor belt system for high accuracy. Easy operation is accomplished with a touch screen; simply enter the length, number of pieces, and press START.

      

  14. TUBING CUTTER FOR CLEANROOM ENVIRONMENT

    TUBING CUTTER FOR CLEANROOM ENVIRONMENT

    Model: CUSTOM TUBING CUTTER 218010

    Material:  Flexible tubing 

    Requirements: 

    This application required unwinding tubing from a roll and cutting it to length.  The unit will be in a cleanroom environment, and the product will be used to make medical devices.  Entire system needs to be mounted on a portable, adjustable equipment stand.

      

  15. TUBING CUTTER WITH 45 DEGREE CUTTING HEAD

    TUBING CUTTER WITH 45 DEGREE CUTTING HEAD

    Model: Custom Tubing Cutter 218004

    Material:   Clear, flexible tubing

    Requirements: 

    This application required cutting the tubing on a 45 degree angle

      

  16. Turret Unwind

    Turret Unwind

    Model: Custom Turret Unwind 213046

    Turret Unwind 213046

      

  17. 214045 Unwind + Roll Feeder + Punch

    Unwind / Roll Feeder / Punch / Cut To Length

    Model: Custom cut-to-length 214045

    AZCO SUR-CUT™ Station with a cordless unwind, Brake RF110, punch station, dual tape station and FG-110 cut to length.

     

      

  18. UNWIND / SLITTER STATION / ROLL FEEDER / KNIFE ASSEMBLY / REWIND

    UNWIND / SLITTER STATION / ROLL FEEDER / KNIFE ASSEMBLY / REWIND

    Model: CUSTOM UNWIND / SLITTER STATION / KNIFE ASSEMBLY / REWIND 215040

    Material

    Varying widths 3/8” – 12 ¾ “ tape

    Requirements

    Unwind, slit, cut to length, and rewind material from roll

      

  19. UNWIND/REWIND WITH COATING AND DRYING STATION

    UNWIND/REWIND WITH COATING AND DRYING STATION

    Model: CUSTOM UNWIND/REWIND STATION 219018

    Requirements: 

    This application required unwinding, coating, drying and rewinding material from rolls.

    Material: 

    • Roll ID:  3”
    • Roll OD:  12”

      

  20. UP-150 PRECISION PUNCH

    UP-150 PRECISION PUNCH

    Model: CUSTOM PUNCH 220004

    Requirements: 

    This application required punching and removing the slug from the material.

      

Items 61 to 80 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page