📞 973-439-1428

Converting

Items 41 to 60 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  1. H-Stand

    H-Stand

    Model: Custom H-Stand 212018

    H-Stand 212018

      

  2. Heavy Duty Cantilever Unwind

    Heavy Duty Cantilever Unwind

    Model: Custom Unwind

    Requirements

    Unwinds come in stock sizes, and we can also modify our proven design to meet other application requirements.

      

  3. HEAVY DUTY DUAL UNWIND

    HEAVY DUTY DUAL UNWIND

    Model: CUSTOM HEAVY DUTY UNWIND 216074

    Material:  Plastic film in roll form

    Requirements: 

    This application required an unwind for plastic film 9”-36” wide to be added to an existing process with a maximum line speed of 50’/min or 10”/sec, in a Class 7 clean room environment.

      

  4. Heavy Duty Unwind

    Heavy Duty Unwind

    Model: Custom Heavy Duty Unwind 213045

    Heavy Duty Unwind 213045

      

  5. Lamination Station with Unwind, Rewind, and Roll Feed Assembly

    Lamination Station with Unwind, Rewind, and Roll Feed Assembly

    Model: Custom Lamination Station with UD Dancer and Roll Feed 207048

    Requirements

    This application required a system with an unwind roll having the following dimensions of 3” core, 18” or less OD, up to 8” wide weighing under 50 lbs.

      

  6. LAMINATOR AND CUT-TO-LENGTH SYSTEM

    LAMINATOR AND CUT-TO-LENGTH SYSTEM

    Model: CUSTOM LAMINATOR AND CUT-TO-LENGTH 218071

    Material:  4 rolls of material consisting of PET film, aluminum coated PET with adhesive, and removable liners.

    Requirements: 

    This application required unwinding and laminating 4 rolls of material, and cutting the laminated product to length.

      

  7. Laminator and cut-to-length unit

    Laminator and cut-to-length unit

    Model: Custom Laminator 212019

    Requirements

    Application: a 70mm film on a spool which needed to have a UV adhesive placed onto it; laminate a thicker plastic top piece; go through a set of nip rollers; and then cut the lamination to a registered mark to length.

      

  8. Laminator Unwind

    Laminator Unwind

    Model: Custom Laminator unwind 213039

    213039 - Laminator unwind

      

  9. LASER MICRO PERFORATION / PUNCH / CUT-TO-LENGTH STATION

    LASER MICRO PERFORATION / PUNCH / CUT-TO-LENGTH STATION

    Model: CUSTOM LASER MICRO PERFORATION STATION 215046

    Material:  200mm [7.87"] max Nonwoven, 100mm [3.94"] Film

    Requirements

    Feed, micro-perforate, punch and cut material with accuracy +/- 0.38mm [0.015"] or 0.1% of cut length, whichever is greater.

      

  10. MANUAL CUTTING STATION GO-110HD

    MANUAL CUTTING STATION GO-110HD

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 217033


    Material: Solid plastic sticks

    Requirements:

    To manually cut material to length.

      

  11. Pneumatic Shear-Cut Slitting Station

    Pneumatic Shear-Cut Slitting Station

    Model: Custom Slitting Station SLS-26SP

    Requirements

      

  12. Punch Assembly

    Punch Assembly

    Model: Custom High Speed Punch 211035

    Requirements

    This application required punching a roll of material approximately 4” wide and then rewinding it back onto a core. Precise holes were placed in the material. The cycle rate requirement was approximately 400 punches/minute with a tolerance of +/- .008”

      

  13. ROTARY DIE STATION RDS-250 WITH CONVEYOR

    ROTARY DIE STATION RDS-250 WITH CONVEYOR

    Model: CUSTOM ROTARY DIE STATION 217020

    Material:  Sheets of bark candy

    • Product size: 178mm x 229mm [7” x 9”]
    • Product thickness: 3mm – 5mm [0.12” to 0.2”]
    • Sheets per min: 16 – 35
    • Maximum final size: 50.8mm x 76.3mm [2” x 3”]

    Requirements:

    This application required breaking the product into rough edge pieces, approximately 2”x3” in size.

      

  14. Rotary Shear Cut Knife Assembly MC-110

    Rotary Shear Cut Knife Assembly MC-110

    Model: Custom Rotary Knife Assembly 212027

    Requirements

    This application required a rotary cutter for a very thin, small fiber type material coming out of an extruder.

      

  15. Rotary Shear Cutter RS-630

    Rotary Shear Cutter RS-630

    Model: Custom Rotary Shear Cutter 212008

    Requirements

    This application required cutting a .005" aluminum product on a continuous basis.

      

  16. Shear Cut Traveling Knife Assembly

    Shear Cut Traveling Knife Assembly

    Model: Custom Traveling Knife 213067

    AZCO Corporation has designed a shear cut traveling knife assembly ideal for material 1600mm wide and 3mm-55mm thick. This cut to length unit is built to feed the material all the way through the knife assembly. A precision ground urethane drive top roller supplies a force which provides positive traction between the material and the drive system. The brushless servo motor provides high accuracy and low maintenance. A 1600mm [55”] traveling knife assembly shear cuts the material to size. The knife assembly is servo driven with linear guides for extra strength and support. Easy to use, the unit can be bolted right into an existing process. A color touch screen is used to set up the unit. PLC controls run the servo motor drive and the entire process. To interface the unit to the process, a loop sensor is used. When material is present, the unit will operate; if there is no material, it will wait.

    Requires 110V AC single phase power, 15 amp current, and 80psi compressed air.

      

  17. Unwind Stand

    Sheeter for Narrow Web / Unwind / Stand

    Model: Custom Sheeter 213002

    Material:  A web that was 12” wide.  It was a lamination of nonwoven plastic, and it was a 3-dimensional pocketed product. 

     

    Requirements

    This application required taking rolls of product, slitting to the proper width and then cutting in between the seals, creating sheets that were a 3-dimensionally formed product.  The cycle rate for this application was 80 per minute 12” sheets with an eye registration mark.

      

  18. SHEETER TS-54

    SHEETER TS-54

    Model: Custom Sheeter 216082

    Material:             Polyethylene roll

    • Width:             36”
    • Thickness:        0.002” thick / ply
    • OD:                 28”
    • ID:                    3”

    Requirements: 

    This application required unwinding and cutting to length a roll of polyethylene to the following specifications:

    • Tolerance:         ± 3.2mm [0.125”]
    • Cycle rate:        15 cycles per min at 50mm [2”], 6 cycles per min at 1000mm [40”]

      

  19. Sheeter with Accumulator and Automated Stacker

    Sheeter with Accumulator and Automated Stacker

    Model: Custom Sheeter 209003

    Requirements

    This custom sheeting system takes an extruded film, indexes and cuts the sheets to lengths in increments of up to six digits, and then feeds directly to an automated stacking station.

    The extruded web first enters an accumulator which is equipped with a multitude of rollers and a dancer system to maintain proper web tension. Positioned directly after the accumulator is the FGW-1000 Cut-to-Length unit.

      

  20. Sheeter With Heavy Duty Unwind And Automated Stacking System

    Sheeter With Heavy Duty Unwind And Automated Stacking System

    Model: Custom Sheeter 213081

    This application required unwinding a roll of aluminum, cutting it into 50” long sheets, and stacking them into 12” high stacks. The cycle rate for this application was 9 sheets per minute based on a 56” cut length.

      

Items 41 to 60 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page