📞 973-439-1428

Converting

Items 21 to 40 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  1. Cut-to-Length FG-400 / Unwind / Stand

    Cut-to-Length FG-400 / Unwind / Stand

    Model: Custom Cut-to-Length 212036

    Material: 2mm PVC shrink film.  It is a seamless tube.

    Requirements

    Feed material out on demand.  Cut 160mm lengths at a cycle rate of 60 pieces per minute, and cut 315mm cut parts at a cycle rate of 40 cycles per minute.

      

  2. 215038

    Cut-To-Length FG-400 with Dancer Unwind and Outfeed Conveyor

    Model: Custom Cut-To-Length 215038/206039

    Custom FG-400 with a dancer unwind and conveyor. It includes an encoder, 3 modes of operation, eye registration, PTFE coated material guide, a reduced rake of 3.3 degrees, large opening and pneumatic preload. Minimum length 2”, max length 65”.

      

  3. CUT-TO-LENGTH FG-400 WITH DANCER UNWIND AND SLIP CLUTCH REWIND

    CUT-TO-LENGTH FG-400 WITH DANCER UNWIND AND SLIP CLUTCH REWIND

    Model: CUSTOM CUT-TO-LENGTH 217027

    Material:  Mylar film

    Roll dimensions:

    • 14” wide
    • 13” OD
    • 3” ID
    • 96 lbs.

    Requirements:

    This application required unwinding and cutting perforated film.

      

  4. CUT-TO-LENGTH FG-400 WITH SLITTER AND REWINDER

    CUT-TO-LENGTH FG-400 WITH SLITTER AND REWINDER

    Model: CUSTOM CUT-TO-LENGTH 217085

    Material:  Acrylic, in roll form

    Requirements: 

    This application required unwinding acrylic material from a roll, slitting and cutting the material to length, and rewinding the slit material.

      

  5. CUT-TO-LENGTH FG-51

    CUT-TO-LENGTH FG-51

    Model: CUSTOM CUT-TO-LENGTH 218048

    Material:  Magnetic rubber strip with liner

    Requirements: 

    This application required unwinding magnetic rubber strip material, removing and rewinding a release liner from the strip, placing the strip onto an aluminum extrusion from a process, and cutting it to a pre-determined length.

      

  6. Cut-to-Length Rotary Sheeter FRC-630

    Cut-to-Length Rotary Sheeter FRC-630

    Model: Custom Cut-to-Length 211030

    Material:  3" thick x 15" wide rubber

    Requirements

    This application required a machine to cut rubber on an extruder line.  Extruder line speed was 45'/minute.  Cut length was 12"-25" with a cut accuracy of +/- .020"

      

  7. CUT-TO-LENGTH SM-4

    CUT-TO-LENGTH SM-4

    Model: CUSTOM CUT-TO-LENGTH 217055

    Material:   2” wide paper with a layer of 1 1/8” aluminum attached with adhesive

    Requirements: 

    This application required cutting the aluminum part of the material, but not the entire width of the paper.

      

  8. CUT-TO-LENGTH STATION WITH DANCER UNWIND

    CUT-TO-LENGTH STATION WITH DANCER UNWIND

    Model: CUSTOM CUT-TO-LENGTH 219032

    Material:  Stainless steel sheet metal in roll form

    • Material Width:                Less than 9”
    • Material Thickness:         Less than 0.19”
    • Cut Lengths:                   6.5” – 6.75”
    • Cycle Rate:                     85 CPM at under 10”

    Requirements: 

    This application required unwinding material from a roll, and cutting the material to length.

      

  9. CUT-TO-LENGTH STATION WITH UNWIND AND STAND

    CUT-TO-LENGTH STATION WITH UNWIND AND STAND

    Model: CUSTOM CUT-TO-LENGTH 219071

    Material:  Nickel-chromium alloy in roll form

    • Material Width:              Up to 9”
    • Material Thickness:       .008”
    • Cut Lengths:                  Varying

    Requirements: 

    This application required unwinding material from a roll, and cutting the material to length.

      

  10. Die-Cut Pillow Pouch

    Die-Cut Pillow Pouch

    Model: Custom Die-Cut Pillow Pouch

    Requirements

    To incorporate an oversized version of our standard punch assembly with a custom shape to add to an existing production line in order to produce pouches.

      

  11. Dispensing Sheeter

    Dispensing Sheeter

    Model: Custom Dispensing Sheeter 207027

    Requirements

    This application required dispensing a non-woven separate sheet on demand. The material was 22” wide x 6” ID x 30” OD of core. The roll weight was 250lbs. This unit could handle rolls up to 1000lbs.

      

  12. DUAL SUPPORTED DANCER REWIND

    DUAL SUPPORTED DANCER REWIND

    Model: CUSTOM REWIND 219042

    Material:  Roll of Mylar film

    • Material Width:  12” [305mm]
    • Material Thickness:  1.5 mil
    • Roll OD:  42”[1,067mm]
    • Roll ID:  3” [76mm]
    • Roll Weight:  135 lbs. [61kg]

    Requirements: 

    This application required a rewind accumulator for a roll of Mylar film.

      

  13. FR102 CENTRILEVERED 218012

    FR102 CENTRILEVERED 218012

    Model: CUSTOM CUT-TO-LENGTH ASSEMBLY 218012

    Material: Paper and poly labels

    Requirements

    This application required cutting sewn materials to length.

      

  14. GUILLOTINE KNIFE ASSEMBLIES GC-400SP, GC-250SP WITH CONVEYORS

    GUILLOTINE KNIFE ASSEMBLIES GC-400SP, GC-250SP WITH CONVEYORS

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 217077

    Material:    20cm [7.87in] x 29cm [11.42in] pieces of fluorocarbon-based synthetic rubber

    Thickness:  15mm [0.59in]– 25mm [0.98in]

    Requirements: 

    This application required reducing the pieces of material to small squares, roughly 10mm [0.39in] x 10mm [0.39in].

     

      

  15. Guillotine Knife Assembly

    Guillotine Knife Assembly

    Model: Custom Guillotine Knife Assembly

    Requirements

    This application required a very large opening to pass the product through. Space was very tight.

      

  16. GUILLOTINE KNIFE ASSEMBLY GC-630 WITH UNWIND, ROLL FEEDER, SLITTER, AND CONVEYOR

    GUILLOTINE KNIFE ASSEMBLY GC-630 WITH UNWIND, ROLL FEEDER, SLITTER, AND CONVEYOR

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 218040

    Material:  Carbon filter paper 

    Requirements: 

     This application required unwinding carbon filter paper material from a roll, slitting it, and then cutting the strips to length at varying angles.

      

  17. Guillotine Knife Assembly GH-1000

    Guillotine Knife Assembly GH-1000

    Model: Custom Guillotine Knife Assembly 212071

    Requirements

    To replace an OEM knife assembly with a more reliable modular system.

      

  18. Guillotine Knife Assembly GH-400

    Guillotine Knife Assembly GH-400

    Model: Custom Guillotine Knife Assembly 212067

    Requirements

    This application needed a unit to cut the material on their extruding line.

      

  19. GUILLOTINE KNIFE ASSEMBLY GO-80

    GUILLOTINE KNIFE ASSEMBLY GO-80

    Model: CUSTOM GUILLOTINE KNIFE ASSEMBLY 219062

    Material:  Flat ribbon cable

    Requirements: 

    This application required precisely cutting a section of ribbon cable material in order to do quality control testing.

      

  20. Guillotine Knife Assembly SKC-1651

    Guillotine Knife Assembly SKC-1651

    Model: Custom Guillotine Knife Assembly 213003

    Material:  Laminated polyester foam with nylon backing and/or neoprene

    Requirements

    Cut 61“ wide laminar foam to a certain size.  Line speed was 6.6” a minute, cut length was 12”-16”, and the height off the floor was 30”.

      

Items 21 to 40 of 83 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page