Components

Items 21 to 32 of 32 total

Page:
  1. 1
  2. 2
per page
  1. GC-400 Product Image

    SUR-CUT Guillotine Knife Assembly

    Model: GC-400

    The midrange knife assemblies cut a variety of materials from 400mm to 630mm. Their compact shape allows them to be incorporated into automated machinery. A heavier duty model is available.

      

  2. Punch Assembly

    Punch Assembly

    Model: UP-20

    Our modular punch assemblies have a punch-and-die design to make custom-shaped cut-outs.  Our punch units use hardened-steel tooling that is clean-cutting and fast-acting.  The assembly can be mounted in any orientation, so you can add it to any converting, processing, or assembly line in any way you see fit! Just bolt it on!

      

  3. Traveling Knife Assembly

    Traveling Knife Assembly

    Model: TS Knife

    This modular knife assembly can be made to any size up to 5.5m/18' cut width. It has a rotary shear cut blade which cuts against a hardened anvil. Also available is the crush cut blade, which could be used in place of the shear cut blade for perforating, crush cutting, or score cutting of the material. Two actuators are available: a pneumatic system or a digital electric drive package.

      

  4. Traveling Knife Assembly

    Traveling Knife Assembly

    Model: TC Knife

    This modular knife assembly can be made to any size up to 5.5m/18' cut width. It has a rotary crush cut blade for perforating, crush cutting, or score cutting of the material. Also available is the rotary shear cut blade, which could be used in place of the crush cut blade, which cuts against a hardened anvil. Two actuators are available: a pneumatic system or a digital electric drive package.

      

  5. Traveling Knife Assembly

    Traveling Knife Assembly

    Model: LC-24/LC-36/LC-48

    Simple to operate, this smaller linear shear cutter eliminates the need for cutting boards and scissors.

      

  6. ACU-SLIT™ Slitter Module

    ACU-SLIT™ Slitter Module

    Model: SLC Crush

    The AZCO ACU-SLIT™ slitter module can operate as an in-line option on cut-to-length assemblies, a replacement for worn slitter stations on any web machine, or an add-on to any web processing equipment.

      

  7. ACU-SLIT™ Slitter Module

    ACU-SLIT™ Slitter Module

    Model: SLS Shear

    This modular unit is designed to be bolted onto new or existing equipment. Easy to use. All units come with mounting holes. Precision ground top and bottom shafts are used to hold the shear cut tooling. An eccentric locking system is used to attach the shear cut blades to the shaft. Turning the tooling 90 degrees lets the user adjust the slitters anywhere along the shaft. High load precision bearings are used to support the shafting.

      

  8. AZCO SUR-FEED™ Roll Feeder

    AZCO SUR-FEED™ Roll Feeder

    Model: RF-110 to RF-630

    These feeders index webs of material through a production process. The process may be cutting, stamping, or any other operation that requires an intermittent motion. The units can feed continuously as a slave to another machine.

      

  9. AZCO SUR-FEED™ Roll Feeder

    AZCO SUR-FEED™ Roll Feeder

    Model: RF-1000

    Our large roll feeder is a high performance servo motor driven model with a pneumatically pre- loaded idler roller for handling wider, heavier materials.

      

  10. SUR-SIZE™ Cut-To-Length Assembly

    SUR-SIZE™ Cut-To-Length Assembly

    Model: FG-110

    The combination of a knife assembly and a roll feeder creates a Sur-Size™ cut-to-length assembly. The Sur-Size™ cut-to-length assemblies are capable of handling a wide variety of flexible materials. The cut to length assembly is a reliable, simple to use, self-contained module. It is a complete unit that delivers a finished product to your specifications. The unit can run to a length or to a registration mark.

      

  11. SUR-SIZE™ Cut-To-Length Assembly

    SUR-SIZE™ Cut-To-Length Assembly

    Model: FG250/FG400/FG630

    The combination of a knife assembly and a roll feeder creates a Sur-Size™ cut-to-length assembly. The Sur-Size™ cut-to-length assemblies are capable of handling a wide variety of flexible materials. The cut to length assembly is a reliable, simple to use, self-contained module. It is a complete unit that delivers a finished product to your specifications. The unit can run to a length or to a registration mark.

      

  12. Tubing Cutter

    Tubing Cutter

    Model: PC-25

    Bench top tubing cutter is ideal for your tube processing. The tubing is indexed by a dual driver tractor belt system for high accuracy. For easy operator use, the stepper drive is controlled by the color touch screen; simply enter the length and number of pieces. Also, all parameters of the machine are from the screen. There is a supervisor section of the program which would set up the parameters.

      

Items 21 to 32 of 32 total

Page:
  1. 1
  2. 2
per page