Showing 1–45 of 51 results
AZCO SUR SIZE™ Sheeter FGW 1000 is the highly versatile and customizable automatic cutter for precision cutting flexible materials to your mo...
Requirements:
Feed and cut to a precision length with a tolerance of +/-.015 inches.
Material: Learn More
The AZCO ACU-SERT™ Inserter CI-250 will automatically feed, cut and dispense sheets for your application. With an optional eye registration s...
AZCO Corp. offers complete, modular guillotine knife assemblies ready to install as stand-alone or in-line units. These midrange units can be...
A modular system that would give the flexibility to feed material out and then make a manual cut with a...
A module shear cut slitter station was needed to take material and slit it down to the proper size.
Material: 3/8” x 3″ wide pad, with sealed air between each pad. Requirements Accurately f...
Feed material out on demand. Cut 160mm lengths at a cycle rate of 60 pieces per minute, and cut 315mm ...
This application required accurately feeding a paper-based product with a lot of dots on it to a length...
Feed material into machine through 10 adjustable lanes. Cut 4″ lengths of the material at a speed...
This application required a machine to cut rubber on an extruder line. Extruder line speed was 45̵...
The combination of a knife assembly and a roll feeder creates a SUR-SIZE™ cut-to-length assembly. The SUR-SIZE™ cut-to-length assemblies are ...
The unpowered unwind stand uses a hysteresis-type magnetic brake to control web tension. Torque control is accomplished by turning the large ...
A motorized unwind has a manual control on the unwind tower which controls the motor speed. An optical sensor keeps the material loop within ...
Powered cantilever-style unwind stands are available. They can be bench-mounted and are simple to use. The flange can be removed and locked i...
This rotary crush cutter with easily replaced blades is capable of doing hundreds of cuts per minute. Its modular configuration design can be...
These feeders index webs of material through a production process. The process may be cutting, stamping, or any other operation that requires...
AZCO Corp. offers complete, modular guillotine knife assemblies ready to install as stand-alone or in-line units. The GH series is a heavy du...
The combination of a knife assembly and a roll feeder creates a Sur-Size™ cut-to-length assembly. The Sur-Size™ cut-to-length assemblies are ...
This compact, economical sheeter is ideal for low speed applications. Installation is a breeze and setup is done in just a few easy steps. S...
This system cuts a diagnostic sheet into individual pieces.
AZCO’S test strip cutter is an automated two step system. The sheet is pl...
This system cuts diagnostic strips from rolls into individual pieces.
The material will be loaded onto a cantilevered unwind that will...
Simple to use and compact in size, this machine is ideal for making pouches on demand. Just by changing the roll width and entering the pouch...
Our compact rotary knife cartridge is reliable and easy to install. It features an extended shaft for a gear, pulley, or direct motor drive. ...
Our modular rotary knife assemblies are available in many sizes. This unit is capable of making hundreds of cuts per minute. They can easily ...
Our large roll feeder is a high performance servo motor driven model with a pneumatically pre- loaded idler roller for handling wider, heavie...
The SMARTKNIFE™ features a high-cycle rate and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the es...
AZCO’s smallest cutter, the model GO-25, has a unique scissor-style action. This modular guillotine knife assembly is ready to install as a s...
AZCO Corp. offers complete, modular guillotine knife assemblies ready to install as stand-alone or in-line units. These units can be mounted ...
Simple to operate, this smaller linear shear cutter eliminates the need for cutting boards and scissors. This modular unit can be mounted in ...
This modular knife assembly can be made to any size up to 5.5m/18′ cut width. It has a rotary crush cut blade for perforating, crush c...
This modular knife assembly can be made to any size up to 5.5m/18′ cut width. It has a rotary shear cut blade which cuts against a har...
This modular unit is designed to be bolted onto new or existing equipment. Easy to use, all units come with mounting holes. Precision ground ...
The AZCO ACU-SLIT™ slitter module can operate as an in-line option on the cut-to-length assemblies, a replacement for worn slitter stations o...
If you are looking to dispense desiccants, oxygen absorbers, food packs, or promotional items, the VIP-100 dispenser is the ideal solution. Learn More
This dispenser handles pouches up to 3.5 inches wide and 1/4 inch thick at speeds of up to 100 cuts per minute. It incorporates a guillotine ...
![Cut to length with 110mm [4.33?] cut area cuts flexible materials](https://www.azcocorp.com/wp-content/uploads/2021/02/sm4_31.jpg)
