📞 973-439-1428

Product List

Items 1 to 20 of 47 total

Page:
  1. 1
  2. 2
  3. 3
per page
  1. Obsolete part numbers

    Obsolete part numbers

    Model: obsolete part numbers

    sc-1D is now GO-25

      

  2. SMARTKNIFE IMAGE

    SMARTKNIFE™

    Model: SKC-630

    The SMARTKNIFE™, with a patent-pending technology making it operate at a high-cycle rate, features quiet operation and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the essentials of a knife assembly and integrated it into a compact package; all you need is an air supply and a signal.

      

  3. SMARTKNIFE IMAGE

    SMARTKNIFE™

    Model: SKC-400

    The SMARTKNIFE™, with a patent-pending technology making it operate at a high-cycle rate, features quiet operation and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the essentials of a knife assembly and integrated it into a compact package; all you need is an air supply and a signal.

      

  4. SMARTKNIFE IMAGE

    SMARTKNIFE™

    Model: SKC-1000

    The SMARTKNIFE™, with a patent-pending technology making it operate at a high-cycle rate, features quiet operation and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the essentials of a knife assembly and integrated it into a compact package; all you need is an air supply and a signal.

      

  5. FGW-1000 Sheeter Front View

    SUR-SIZE™ Sheeter

    Model: FGW-1000/FGW-1650

    AZCO SUR SIZE™ Sheeter FGW 1000 is the highly versatile and customizable automatic cutter for precision cutting flexible materials to your most precise continuous process requirements.

      

  6. Rotary Knife Assembly

    Rotary Knife Assembly

    Model: MC110 Minicut

    Our compact rotary knife cartridge is reliable and easy to install. It features an extended shaft with a gear, pulley or direct motor drive. This smaller, shear cut unit offers clean, precise cuts on film, foil, paper, non-woven and most flexible materials. It has a built in modular configuration so it can be easily incorporated into new machines or inserted into an existing process. Mounting holes are provided so you can bolt it in. The output shaft is provided to be driven or we could install a drive package for you. We can customize our standard designs to meet your requirements.

      

  7. SUR-PAK™  Pouch Dispenser

    SUR-PAK™ Pouch Dispenser

    Model: SP-4D with enclosure

    This dispenser handles pouches up to 3.5 inches wide and 1/4 inch thick at speeds of up to 100 cuts per minute. It incorporates a guillotine cutter and uses compressed air to drive the knife. It is ideal for narrow, limited space applications.

      

  8. Punch Assembly

    Punch Assembly

    Model: UP-40

    Our modular punch assemblies have a punch-and-die design to make custom-shaped cut-outs.  Our punch units use hardened-steel tooling that is clean-cutting and fast-acting.  The assembly can be mounted in any orientation, so you can add it to any converting, processing, or assembly line in any way you see fit! Just bolt it on!

      

  9. SMARTKNIFE IMAGE

    SMARTKNIFE™

    Model: SKC-250

    The SMARTKNIFE™, with a patent-pending technology making it operate at a high-cycle rate, features quiet operation and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the essentials of a knife assembly and integrated it into a compact package; all you need is an air supply and a signal.

      

  10. Standard CI-250

    ACU-SERT™ Inserter

    Model: CI-250

    The AZCO ACU-SERT™ Inserter CI-250 will automatically feed, cut and dispense sheets for your application. With an optional eye registration system, the unit will cut registered sheets, without the need of a printed eye mark. The use of material in roll form will save approximately 20% of the cost of the material, compared to using pre-cut sheets. With a roll, labor is reduced and operator error is eliminated. One roll can hold over 30,000 insertions and there is no need to continuously load a magazine, as done with pre-cut sheets.

      

  11. SUR-CUT Guillotine Knife Assembly

    SUR-CUT Guillotine Knife Assembly

    Model: GH-1000

    This heavy duty knife assembly can cut a variety of materials. Standard cut width is 1000mm. A custom unit can accommodate a cut width of up to 1600mm. Various blade openings and clearances can also be modified to meet your specifications. Incorporate the SUR-CUT into new or existing machinery. Just Bolt It On.

      

  12. GC-250 Product Image

    SUR-CUT Guillotine Knife Assembly

    Model: GC-250

    This midrange modular knife assembly cuts a variety of materials. Its compact size allows it to be incorporated into automated machinery. Equipped with mounting holes, this unit is available with a SMARTKNIFE option and a hook up kit. A heavier duty model is also available.

      

  13. Test Strip Cutter

    Test Strip Cutter

    Model: Test Strip Cutter from Sheets

    This application requires cutting a diagnostic sheet into individual pieces.

    AZCO’S test strip cutter is an automated two step system.  The sheet is placed onto an in-feed station from where  the motor actuator will move it into the first cutting station.  This station will cut the sheet into individual cards.  The cutting station will have rotary shear cut blades driven by a variable speed motor. The edge trim and the areas between the strips will go into a scrap bin below.

      

  14. Vacuum Index System

    Vacuum Index System

    Model: VIS-XXX-YY-Z

    Reduce the risk of damage to your product with our vacuum transfer system.

    AZCO’s vacuum index system is ideally suited for handling materials where only one surface can be contacted. The vacuum index system is a complete system which includes a transfer section, a vacuum generating station, and precision drive package. Together, this module is able to handle different width materials. The material is vacuum-held onto a transfer belt which is a continuous, smooth urethane belt with vacuum ports. The structured transfer system comes in different widths and lengths and different mounting arrangements for easy installation into your process or into your equipment. A vacuum system is sized for your transfer device and material; all you have to do is plug it in.

      

  15. Cut-to-Length

    SUR-SIZE™ Cut-To-Length Assembly

    Model: FG-160

    The combination of a knife assembly and a roll feeder creates a Sur-Size™ cut-to-length assembly. The Sur-Size™ cut-to-length assemblies are capable of handling a wide variety of flexible materials. The cut to length assembly is a reliable, simple to use, self-contained module. It is a complete unit that delivers a finished product to your specifications. The unit can run to a length or to a registration mark.

      

  16. SUR-CUT Guillotine Knife Assembly

    SUR-CUT Guillotine Knife Assembly

    Model: GC-630

    The midrange knife assemblies cut a variety of materials from 400mm to 630mm. Their compact shape allows them to be incorporated into automated machinery. A heavier duty model is available.

      

  17. SUR-CUT Guillotine Knife Assembly

    SUR-CUT Guillotine Knife Assembly

    Model: GO-160

    AZCO offers complete, modular guillotine knife assemblies ready to install as stand-alone or in-line units. These units can be mounted in any position for convenient operation. They cut a wide variety of flexible materials such as film, foil, paper, light gauge metals (.25mm/01 in.), non-wovens, foam rubber, ribbon cables, Velcro and many others. The small SUR-CUT knife assemblies are widely used for cutting various strips of flexible materials. The open frame design gives easy access to the material. Mounting holes allow quick installation.

      

  18. SUR-CUT Guillotine Knife Assembly

    SUR-CUT Guillotine Knife Assembly

    Model: GO-110

    AZCO offers complete, modular guillotine knife assemblies ready to install as stand-alone or in-line units. These units can be mounted in any position for convenient operation. They cut a wide variety of flexible materials such as film, foil, paper, light gauge metals (.25mm/01 in.), non-wovens, foam rubber, ribbon cables, Velcro and many others. The small SUR-CUT knife assemblies are widely used for cutting various strips of flexible materials. The open frame design gives easy access to the material. Mounting holes allow quick installation.

      

  19. SUR-PAK™  Pouch Dispenser

    SUR-PAK™ Pouch Dispenser

    Model: 5D

    The 5D pouch dispenser is most commonly used for dispensing desiccant and oxygen absorbers.  It is able to run products from all manufacturers, giving you the freedom of choice to get the most competitive pricing for your material.

      

  20. Tubing Cutter

    Tubing Cutter

    Model: PC-25

    Bench top tubing cutter is ideal for your tube processing. The tubing is indexed by a dual driver tractor belt system for high accuracy. For easy operator use, the stepper drive is controlled by the color touch screen; simply enter the length and number of pieces. Also, all parameters of the machine are from the screen. There is a supervisor section of the program which would set up the parameters.

      

Items 1 to 20 of 47 total

Page:
  1. 1
  2. 2
  3. 3
per page