📞 973-439-1428

Unwinds / Rewinds

12 Item(s)

per page
  1. Heavy Duty Cantilever Unwind

    Heavy Duty Cantilever Unwind

    Model: Custom Unwind

    Requirements

    Unwinds come in stock sizes, and we can also modify our proven design to meet other application requirements.

      

  2. Acu-Slit Slitting Machine - Dancer Unwind/Rewind

    Acu-Slit Slitting Machine - Dancer Unwind/Rewind

    Model: Custom Slitter with Dancer Unwind/Rewind

    Requirements

    Copper and aluminum foil needed to be slit to size. The copper was .0005” thick and the aluminum foil was .001” thick. A 3” inside dimension roll weighed 35 lbs.

      

  3. AZCO SUR-FEED™ Roll Feed and Unwind Module on stand

    AZCO SUR-FEED™ Roll Feed and Unwind Module on stand

    Model: Custom Roll Feed and Unwind Module on Stand

    Requirements

    This application included unwinding and feeding a 4.5 mil x 1 ½” wide plastic roll of tape. The material operated at speeds of 1700 inches per minute.

      

  4. Lamination Station with Unwind, Rewind, and Roll Feed Assembly

    Lamination Station with Unwind, Rewind, and Roll Feed Assembly

    Model: Custom Lamination Station with UD Dancer and Roll Feed Assembly

    Requirements

    This application required a system with an unwind roll having the following dimensions of 3” core, 18” or less OD, up to 8” wide weighing under 50 lbs.

      

  5. Cut-to-Length FG-110 / Unwind / Stacker / Index Conveyor

    Cut-to-Length FG-110 / Unwind / Stacker / Index Conveyor

    Model: Custom Cut-to-Length 212076

    Material:  16mm and 28mm fibrous strap material

    Requirements

    Unwind, feed, and cut a roll of material to 750mm, and after it was cut create stacks of 20 to 30 pieces into an indexing conveyor.  After the stack was made, the index conveyor would index into a new position and build a new stack.

      

  6. 215038

    Cut-To-Length FG-400 with Dancer Unwind and Outfeed Conveyor

    Model: Custom Cut-To-Length 215038/206039

    Custom FG-400 with a dancer unwind and conveyor. It includes an encoder, 3 modes of operation, eye registration, Teflon coated material guide, a reduced rake of 3.3 degrees, large opening and pneumatic preload. Minimum length 2”, max length 65”.

      

  7. Sheeter With Heavy Duty Unwind And Automated Stacking System

    Sheeter With Heavy Duty Unwind And Automated Stacking System

    Model: Custom Sheeter 213081

    This application required unwinding a roll of aluminum, cutting it into 50” long sheets, and stacking them into 12” high stacks. The cycle rate for this application was 9 sheets per minute based on a 56” cut length.

      

  8. 214045 Unwind + Roll Feeder + Punch

    Unwind / Roll Feeder / Punch / Cut To Length

    Model: Custom Solution 214045

    AZCO SUR-CUT™ Station with a cordless unwind, Brake RF110, punch station, dual tape station and FG-110 cut to length.

    *additional options can be purchased before shipment.

      

  9. Laminator Unwind

    Laminator Unwind

    Model: Custom Laminator unwind 213039

    213039 - Laminator unwind

      

  10. Turret Unwind

    Turret Unwind

    Model: Custom Turret Unwind 213046

    Turret Unwind 213046

      

  11. Heavy Duty Unwind

    Heavy Duty Unwind

    Model: Custom Heavy Duty Unwind 213045

    Heavy Duty Unwind 213045

      

  12. UNWIND / SLITTER STATION / ROLL FEEDER / KNIFE ASSEMBLY / REWIND

    UNWIND / SLITTER STATION / ROLL FEEDER / KNIFE ASSEMBLY / REWIND

    Model: CUSTOM UNWIND / SLITTER STATION / KNIFE ASSEMBLY / REWIND 215040

    Material

    Varying widths 3/8” – 12 ¾ “ tape

    Requirements

    Unwind, slit, cut to length, and rewind material from roll

      

12 Item(s)

per page