Crush-Cut Slitting Station Customer needed a custom slitting unit five (5) independently-controlled knives, all operated via separate switches. This unit included an output shaft and is motorized lower anvil. Unit will include switches to make each blade independent from the other.
Pneumatic Shear-Cut Slitting Station This 11 pneumatic shear cut slitting station. Features pneumatically-controlled switches for each slitting blade, giving the opportunity to make as many as 11 cuts or as little as 1 cut of thin material. You could slit a wide varity of flexible materials such as films, foils, paper, non-woven and laminated products. Easy to adjust the slit width by moving the slitter holders on the dove tail bar. You could have it either motorized or unmotorized as shown. This module is design so you could bolt it into your new or existing machine or process.
Acu-Slit Slitting Station - Dancer Unwind/Rewind Copper and aluminum foil need to be slit to size. The copper was .0005” thick and the aluminum foil was .001” thick. A 3” Inside Dimension roll weighed 35lbs. The roll of material was placed on the unwind stand. From the unwind shaft the material went over an idler roller. A dancer assembly controlled the unwind motor drive. The shear cut slitter station slit the foil to size. Urethane drive rollers feed the web thru the slitter station and the material went into a set of guide rollers, which separated each strip of material. A differential airshaft held each new core in place. The advantage of the differential air shaft permits each strip to be rewind to a constant tension.
